SABROE

Innovative Engineering Makes Our Industrial Refrigeration Solutions Reliable and Efficient

RECIP COMPRESSOR UNIT

CMO Compressor Units

CMO compressor units are small units specially designed for use in smaller-scale refrigeration installations where reliability is a particular concern and uninterrupted service a big priority.

  • High COP with excellent performance
  • Low noise and vibration level
  • Easy access for service
SMC Compressor Unit

SMC compressor units are ideal for use in medium-sized refrigeration installations where reliable service is a major priority.

  • High COP with excellent part-load performance
  • Minimum power consumption and operating costs
  • Small footprint and easy access for service
HPC Compressor Unit

The blocks of the compressor units in the HPC range are cast in high-strength ductile iron, making them particularly strong and capable of operating under exceptionally high pressures.

  • Low power consumption, especially under part-load conditions
  • Exceptionally high condensing temperatures - up to 77°C
  • Easy access for service
TSMC Compressor Unit

Sabroe TSMC two-stage reciprocating compressors are an economical operating alternative to single-stage compressors in smaller low-temperature refrigeration installations.

  • High COP with excellent part-load performance
  • Easy to customise with intermediate cooling systems
  • Low power consumption
HPX Compressor Unit

The blocks of the compressor units in the HPX range are cast in high-strength ductile iron, making them particularly strong and capable of operating under exceptionally high pressures.

  • Low power consumption, especially under part-load conditions
  • Exceptionally high condensing temperatures - up to 90°C
  • Easy access for service
HPO Compressor Unit

The blocks of the compressor units in the HPO range are cast in high-strength ductile iron, making them particularly strong and capable of operating under exceptionally high pressures.

  • Low power consumption, especially under part-load conditions
  • Exceptionally high condensing temperatures - up to 77°C
  • Easy access for service

SCREW COMPRESSOR UNIT

SGC Compressor Unit

The Sabroe SGC screw compressors, SAB 193, 233, 283 and 355, are specifically engineered to deal with larger-scale industrial refrigeration installations

  • Variable-speed drive and stepless capacity control
  • Always equipped with UniSAB systems controller
  • Space-saving design with small footprint
XJF Compressor Unit

Sabroe XJF screw compressors, SAB 120-151, are designed and configured to tackle smaller-scale industrial refrigeration requirements where a combination of exceptional reliability, high performance and low operating costs is essential.

  • Maximum part-load efficiency and lowest possible operating costs
  • Long bearing life, providing maximum reliability
  • Space-saving design with small footprint
SGC HP Compressor Unit

These unique high-pressure compressor units are ideal for large, site-built ammonia heat pump installations that require condensing temperatures up to 72°C.

  • Designed specifically for CO2 or ammonia as refrigerant
  • Always high performance at both full and part load
  • Exceptional reliability and low maintenance costs

Reciprocating Chillers

PAC Recip Chillers

PAC ammonia-based chillers are fully integrated packaged units, designed to take full advantage of the many different models of ultra-reliable Sabroe reciprocating compressors.

  • Factory-assembled, pretested packaged units
  • Available in many compressor capacities making it easy to match specific requirements
  • Outstanding reliability
ChillPAC Chiller

ChillPAC ammonia-based chillers feature an ultra-compact format so narrow that they can even pass through a normal doorway. This is achieved by having an extra-compact shell-and-plate evaporator/condenser, oil separator, and control system all built in and fully integrated into a unique vibration-resistant design.

  • Exceptionally compact design
  • Refrigerant charge 50% smaller than conventional chillers
  • High COP and outstanding part-load performance
CAFP Chiller

The highly customisable Sabroe CAFP freezer systems are using CO2 on the low-temperature side and NH3 (ammonia) on the high-temperature side, giving you the best of both worlds.

  • Compact design that require small footprint
  • High COP and very low power consumption
  • Very small ammonia charge
ChillPAC Air Chiller

ChillPAC Air uses ammonia as refrigerant and is a series of air-cooled chillers based on ultra-reliable Sabroe reciprocating compressors. It is a factory-assembled system for outdoor installation.

  • Outdoor installation in weatherproof enclosure
  • Easy to mount, install and connect
  • Natural refrigerant R717 (ammonia)

Screw Chillers

PAC Screw Chillers

PAC ammonia-based chillers are fully integrated packaged units, designed to take full advantage of the many different models of ultra-reliable Sabroe screw compressors.

  • Factory-assembled, pretested packaged units
  • Available in many compressor capacities making it easy to match specific requirements
  • Outstanding reliability
ComPAC Chiller

ComPAC ammonia chillers based on plate-and-shell heat exchangers and the comprehensive Sabroe screw compressor programme (SAB 120-151 to SAB 193-233) are distinctive for their compact design. Frequency converter and panel solutions are supplied as standard.

  • Compact design with a very small footprint
  • Exceptional COP and outstanding part-load performance
  • Small refrigerant charge

Auxiliary Controllers

Chiller and Heat Pump Plant Controller

With the Sabroe Chiller and Heat Pump Plant Controller (CHPPC), the parameters to maximise uptime and efficiency and minimise the lifecycle cost of the equipment is available at your fingertips.

  • Intuitive on-screen configuration
  • Save time and cost related to designing, programming, documenting, installing and commissioning
  • Peace of mind with remote diagnosis and operation
UniSAB III Control

UniSAB systems controllers are connectivity hubs that ensure refrigeration installations have the best possible performance, maximum uptime, and the lowest possible operating costs.

  • Ensures best possible performance of refrigeration installations
  • Intuitive, easy-to-use interface
  • Effective management of important operating data
Sabroe Vibration Monitoring System

SVM provides accurate, continuous monitoring of the bearing vibration levels in Sabroe screw compressor packages, adding significant extra safety margins and potentially extending the service life of these crucial compressor components.

  • Constant monitoring of bearing vibration development
  • Early warning of any increasing bearing fatigue
  • Minimises risk of severe equipment damage

Reciprocating Heat Pumps

HyePAC Heat Pump
  • Highly efficient heat pump solution using hybrid absorption-compression technology to generate high temperatures with low operating pressures
  • HyePAC can deliver water temperatures up to 120 C with a capacity range of 500 kW to 2,300 kW
  • This green technology - using natural refrigerants; ammonia and water - ensures environmentally friendly production for virtually every enterprise.
DualPAC Heat Pump
  • Stepless, skip-free capacity control ensures that output always matches requirements
  • Space-saving footprint and very low vibration
  • Reliability, long service intervals, minimal downtime, low cost of ownership
HeatPAC Heat Pump

HeatPAC units are extremely compact heat pumps based on ultra-reliable Sabroe HPO/HPC/HPX high-pressure reciprocating compressors achieving up to 40 bar differential pressures and up to 60 bar design pressures.

  • Exceptional COP and outstanding part-load performance
  • Easy to mount, even in confined spaces or unconventional locations
  • Reliability, long service intervals, minimal downtime, low cost of ownership
HeatPAC Cascade Heat Pump

HeatPAC units are extremely compact heat pumps based on ultra-reliable Sabroe HPO/HPC/HPX high-pressure reciprocating compressors achieving up to 40 bar differential pressures and up to 60 bar design pressures.

  • Exceptional COP and outstanding part-load performance
  • Easy to mount, even in confined spaces or unconventional locations
  • Reliability, long service intervals, minimal downtime, low cost of ownership

High Capacity Screw Heat Pump

HicaHP Heat Pumps

  • Sabroe HicaHP (high capacity heat pumps) are compact heat pumps optimised to enable large-scale heat pump installations to support your path to net zero.

    • Designed to meet your needs for greater energy efficiency and operating flexibility
    • Space-saving footprint and very low vibration level
    • Capacities ranging from 2 MW to 7 MW

HyePac Heat Pump

HicaHP Heat Pumps
    • Highly efficient heat pump solution using hybrid absorption-compression technology to generate high temperatures with low operating pressures
    • HyePAC can deliver water temperatures up to 120 C with a capacity range of 500 kW to 2,300 kW
    • This green technology - using natural refrigerants; ammonia and water - ensures environmentally friendly production for virtually every enterprise.

Condensers

COSB Shell-and-Tube Condenser

The heat exchanger is designed for heating of secondary fluid mediums like water, ethylene, propylene glycol and other non-corrosive mediums. The capacity range is between 50 kW and 10,000 kW.

  • Designed for heating of secondary fluid mediums like water, ethylene and other non-corrosive mediums
  • Calculation and product selection via COMP1
  • Cost-effective option for systems without corrosive elements in the brine
COTB Shell-and-Tube Condenser

The heat exchanger is designed for heating of secondary fluid mediums like water, ethylene and propylene glycol with a key focus on heating of corrosive mediums similar to brackish water for heat pumps and offshore applications. The capacity range is between 50 kW and 10,000 kW.

  • Designed with a key focus on heating of corrosive mediums for heat pumps and offshore applications
  • Calculation and product selection via COMP1
  • Available in more than 100 configurations
COTB Shell-and-Tube Condenser

The heat exchanger is designed for heating of secondary fluid mediums like water, ethylene, propylene glycol and other non-corrosive mediums. The capacity range is between 50 kW and 10,000 kW.

  • Designed for heating of secondary fluid mediums like water, ethylene and other non-corrosive mediums
  • Calculation and product selection via COMP1
  • Stainless tube material that can operate with all natural refrigerants

Desuperheaters

DISS Shell-and-Tube Desuperheater

The desuperheater is designed to heat water in a closed circuit on the outside of straight steel tubes by cooling high-pressure gas inside tubes with star insert.

  • Requires less compressor work compared to a plate-and-plate solution
  • Calculation and product selection via COMP1
  • Available in five configurations

Cascade Heat Exchangers

DISS Shell-and-Tube Desuperheater

The ECSQ series combines Sabroe’s smart boiling and condensing heat transfer technology using a horizontal shell-and-tube heat exchanger for in-tube condensing and boiling on the shell side.

  • No need for a conventional liquid separator
  • Minimal refrigerant charge and very efficient heat transfer on the shell side
  • Calculation and product selection via COMP1

Evaporators

ESTO Shell-and-Tube Evaporator

The heat exchanger is designed for cooling of secondary fluid mediums like water, ethylene and propylene glycol.

  • Designed with a key focus on cooling sea or brackish water for heat pumps and offshore applications
  • Calculation and product selection via COMP1
  • Available in 10 configurations
ESRB Shell-and-Tube Evaporator

The heat exchanger is designed for cooling of secondary fluid mediums like water, ethylene, propylene glycol and other non-corrosive mediums. The capacity range is between 100 kW and 6500 kW.

  • Designed for cooling of secondary fluid mediums like water, ethylene and other non-corrosive mediums
  • Calculation and product selection via COMP1
  • Available in more than 100 configurations
ESSB Shell-and-Tube Evaporator

The heat exchanger is designed for cooling of secondary fluid mediums like water, ethylene, propylene glycol and other non-corrosive mediums. The capacity range is between 100 kW and 6500 kW.

  • Designed for cooling of secondary fluid mediums like water, ethylene and other non-corrosive mediums
  • Calculation and product selection via COMP1
  • Available in more than 100 configurations

Suction Gas Heat Exchangers

HXSG Suction Gas Superheater

The suction gas superheater increases the cooling capacity a little and decreases the risk of liquid or liquid formation in the compressor, which could result in breakdown.

  • High and efficient heat transfer rate
  • Robust design
  • Low cost of ownership
  • Available in 10 configurations

Oil Coolers

OWSG Subcooler

In addition to oil cooling, the OWSG desuperheater is also suitable for installation as a subcooler or a liquid cooler, if needed.

  • Designed for cooling of oil in screw compressor applications
  • Calculation and product selection via COMP1
  • Available in more than 100 configurations

Oil Pot

OB Oil Pot

The series of receivers also includes oil drain vessels.

  • Tailor-made pressure vessels to fit customer applications 
  • Design pressure of 24 bar 
  • Design temperature of min./max.:-40/50°C 

Oil Rectifiers

MERG Oil Rectifiers

An oil rectifier is a small heat exchanger, which is used in an oil return system of a flooded evaporator with refrigerants HCFC, HCF and CO2.

  • Robust and corrosion resistant design
  • For HCFC, HCF and CO2 refrigerants
  • Low cost of ownership

Pump Vessels

PSH Pump Vessel

The PSH pump separator separates the excess liquid refrigerant, which returns from the evaporators in a pump recirculation plant.

  • Low pressure drop
  • Efficient oil drain
  • Easy installation and insulation

Open Inter Cooler

PSMH Open Intercooler

PSMH is a pump separator with a built-in intermediate cooler that separates the excess liquid refrigerant, which returns from the evaporators in a pump recirculation plant.

  • Open intercooler in flooded design
  • Excellent part-load performance
  • No liquid carry-over

Flash Economisers

SVER Open Flash Economiser

The function of the economiser is to cool the liquid refrigerant (subcooling) from the condenser before it is led to the evaporator. The subcooling obtained by installing an economiser improves the efficiency of the refrigeration plant.

  • Designed for operation with most refrigerants
  • Calculation and product selection via COMP1
  • Available in five different configurations

Receivers

HR Receiver

The series of receivers also includes oil drain vessels.

  • Tailor-made pressure vessels to fit customer applications 
  • Design pressure of 24 bar 
  • Design temperature of min./max.:-40/50°C