KIRLOSKAR

Innovative Engineering Makes Our Industrial Refrigeration Solutions Reliable and Efficient

PROCESS PUMPS

Air Cooled Thermic Fluid Process Pump - AT
  • Kirloskar Air Cooled Thermic Fluid AT series of process pumps come with a back pull out design, which enables to remove the rotating unit of pump for inspection and repairs without disturbing suction and delivery pipe connections.
Canned Motor Process Pump - i-CM
  • Kirloskar i-CM process pumps are mainly used for chemical and process handling applications, which are free from suspended solids particles. i-CM process pumps are ideal for pumping corrosive and noxious fluids.
End Suction Process Pump - GK(P)
  • Kirloskar GK(P) pumps are used for handling various types of chemical liquids. These pumps are manufactured to close tolerance and are of rigid construction. GK(P) pumps are mainly used in process industries. The complete range of GK(P) process pumps is covered by four driving units, thereby reducing inventory and achieving interchangeability.
End Suction Process Pump - i-CP
  • Kirloskar End Section Process Pump i-CP pumps are horizontal, radially split, single stage, centrifugal end-suction volute with top centerline delivery. The impeller is of an enclosed type. The bearing housing is fitted with a support foot. The pump shaft is supported by pre-lubricated anti-friction sealed bearings as a standard scope of supply. i-CP pumps come without mechanical seal & without gland packing arrangement and yet ensure zero leakage from the stuffing box. This feature is achieved by the innovative design of the shaft sleeve, expeller and fluid arrester.
End Suction Process Pump - KPD

Kirloskar End Section Process Pump KPD/KPDQF/KPDJ process pumps are used for handling various types of chemical liquids. These process pumps are manufactured to close tolerance and are of rigid construction. However, proper installation, operation and maintenance are equally important to ensure trouble free service. KPD/KPDQF/KPDJ process pumps are either gland packed or mechanically sealed. KPD pumps come with an enclosed impeller (with casing cover for heating/cooling arrangement.). KPD-QF pumps are equipped with a semi-open impeller while the KPD-J type pumps come with a jacketed delivery, casing and casing cover.

Magnetic Drive Process Pump - ROMAK
  • Kirloskar’s Romak process pumps are used for handling various types of CLEAR & CLEAN chemical liquids with leak-free transportation. These pumps are manufactured to close tolerance and are of rigid construction. Romak (RMK) pump is a magnetic drive pump.

SOLID HANDLING PUMP

Solid Handling Pump - NK
  • Effluents, sewage, muddy, viscous, contaminated liquids containing solids in suspension, in sugar factories, sewage pumping stations as well as chemical, fertiliser, pulp and paper, food and steel industries
Solid Handling Pump - SHL
  • Kirloskar SHL solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps. The SHL pump section is suspended by a column pipe which also protects the transmission shaft. The impeller is a single suction type non-clog, free flow dynamically balanced, capable of handling liquids containing solids.
Solid Handling Pump - SHM
  • Kirloskar SHM solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps while SHS are vertical non-clog pumps used for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These solid handling pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. SHM solid handling pumps have standard grease lubrication, although oil lubrication is also available as an option. In case of SHS pumps, the lubrication is grease based. The complete range of SHM solid handling pumps is covered by four driving units, thereby reducing inventory and achieving interchangeability of parts.

UTILITY PUMPS

End Suction Pump - CE
  • Kirloskar’s CE pumps are single stage pumps with a back-pull-out design, which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of CE pumps is covered by four driving units thereby reducing inventory and achieving interchangeability of parts. These CE water pumps are either gland packed or mechanically sealed.
End Suction Pump - CPHM
  • Kirloskar CPHM pumps carry a back-pull-out design which enables removing the rotating unit of pump for inspection and repairs without disturbing the pipe connections. The complete range of CPHM water pump is covered by eight driving units thereby reducing inventory and achieving interchangeability of parts. These CPHM water pumps are either gland packed or mechanically sealed.
End Suction Pump - DBL
  • Kirloskar DB large pumps equip a back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of DB large pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These DBL water pumps are either gland packed or mechanically sealed with robust cast iron casing and are highly efficient. Bronze impeller makes DBL water pumps easy to maintain, reliable and long lasting.
End Suction Pump - DBxe
  • DBxe is dimensionally conforming to EN733/DIN24255. DBxe pump series is energy-efficient and complies with the requirement of Minimum Efficiency Index MEI ≥ 0.7 for water pumps as per EN 16480. These DBxe water pumps are either gland packed or mechanically sealed. The DBxe pumps are of a back-pull-out design which enables to the removal of the rotating unit of the pump for inspection and repairs without disturbing the pipe connections and motor by using spacer-type coupling.
End Suction Pump - GK
  • End section GK pumps conform to ISO: 5199 & dimensionally are fully conforming to ISO 2858/EN: 22858. These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids, which are free from suspended solids particles.
Mixed Flow Pump - MF
  • Kirloskar CPHM pumps carry a back-pull-out design which enables removing the rotating unit of pump for inspection and repairs without disturbing the pipe connections. The complete range of CPHM water pump is covered by eight driving units thereby reducing inventory and achieving interchangeability of parts. These CPHM water pumps are either gland packed or mechanically sealed.
End Suction Pump - DB
  • Kirloskar DB pumps are of back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of DB pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These DB water pumps are either gland packed or mechanically sealed.

ETERNA SERIES

_0000_Vertical-Inline-Pump---KCIL--KSIL

  • KBL’s KCIL/KSIL is a multi-stage vertical inline pump designed to deliver large volumes of water for high head applications, helping customers achieve high turnaround time and productivity. Thus, these lightweight and durable pumps are ideal for a wide range of industrial applications such as in water treatment plants and small capacity power plants as well as in various other industries such as building, dairy and food processing, etc. The high discharge capacity and head range of these pumps also make these useful for agricultural applications such as field irrigation (flooding), sprinkler irrigation and drip-feed irrigation, as well as for domestic applications for facilitating supply of clean water.

_0001_Submersible-Sewage-Dewatering-Pump---CW
  • Sewage Pumping
  • Dewatering from Basements, Multi-storeys, Shopping Malls, Godowns, etc.
  • Construction Site
  • Dewatering Foundation, Trenches and Pits
  • Flood Water Handling
_0002_Submersible-Sewage-Dewatering-Pump---BW

• Removing Stagnant Water from Basement/Underground Parkings/Garages, etc.
• Draining Accumulated Storm Water during Monsoon
• Emptying Water Tanks and Pits for Cleaning
• Draining Waste Water from Kitchens, Hotels, Clubs, etc.
• Removing Surplus Water from Sumps

FIREFIGHTING PUMP

Containerised Fire Pump Set - CFS

  • KBL’s KCIL/KSIL is a multi-stage vertical inline pump designed to deliver large volumes of water for high head applications, helping customers achieve high turnaround time and productivity. Thus, these lightweight and durable pumps are ideal for a wide range of industrial applications such as in water treatment plants and small capacity power plants as well as in various other industries such as building, dairy and food processing, etc. The high discharge capacity and head range of these pumps also make these useful for agricultural applications such as field irrigation (flooding), sprinkler irrigation and drip-feed irrigation, as well as for domestic applications for facilitating supply of clean water.

Fire Sprinkler Pump Set - FLD

  • Kirloskar provides its clients a wide range of world-class fire protection systems. 

    Fire sprinkler pump sets are a crucial component in ensuring that the fire sprinkler heads receive an adequate flow rate to the water distribution piping system at the required pressure. These pumps are connected from a water storage tank to the sprinkler system pipework. Our fire sprinkler systems are entirely automated and do not require any outside intervention. 

    The Fire Sprinkler Pump Set is a unique plug and play firefighting pump covering small and medium areas like bungalows, villas, shops, small/medium offices, godowns, etc.

    KBL sales consultants and project managers help clients choose from the range of fire protection system sets per their needs and requirements.

FM-approved and UL-listed Fire Fighting Pump

  • Kirloskar FM/UL pumps are tested and listed for their use specifically for fire-fighting services by UL (Underwriters Laboratories) and FM (Factory Mutual) Global. This means that our pumps are FM-approved and UL-listed and meet the quality norms of the National Fire Protection Association (NFPA). 

    Thus, with these international approvals, our fire-fighting pump systems have greater reliability when preventing property damage in case of a fire.
     
    KBL’s FM/UL fire fighting pump controllers are sourced from experienced and reliable manufacturers who follow international standards and processes. 

Kirloskar Fire Engine Pump Set - KFE

  • Kirloskar is a leading firefighting pump manufacturer provider of complete fire pump sets, drivers, controllers and accessories. The KFE series pump sets are exclusive firefighting engine pump sets designed for fire application. 

    KBL’s pump sets adhere to the latest standards, including the National Building code (India) and TAC. All the Kirloskar Fire Engine Pump Sets are built and packaged in KBL’s plant governed by Integrated Management System (IMS) as per ISO 9001: 2015, ISO 14001:2015, ISO 45001: 2018 and ISO 50001:2018.

    With KFE single point responsibility of the pumpset lies with KBL. The customer need not follow-up with multiple agencies for commissioning and service of the pumpsets.

Multi-stage Multi-outlet Fire Fighting Pump - MSMO

  • Kirloskar is one of the pioneers to offer the Multi-Stage Multi Outlet (MSMO) pump. These pumps are used in fire protection systems in most high-rise buildings where it is vital to maintain different pressure levels at diverse pressure zones.  

    MSMO fire-fighting pumps by KBL offer many benefits like:

    • The building needing fewer pumps
    • Saves space which can be used in a better way
    • Reduces the number of pipework and valves
    • Eliminates the need for water storage tanks on intermediate floors
    • Reduced loading on the building 

MULTI-STAGE PUMP

Multi-stage Pump - RKB RKBF RKBK

  • Kirloskar RKB series is a horizontal multistage centrifugal pump. RKB/RKBF/RKBK horizontal multistage centrifugal pumps are side suction pumps with vertical delivery and diffuser type casing. RKB horizontal multistage centrifugal pump series impellers are of radial flow type provided with balancing holes. RKB/RKBF/RKBK horizontal multistage centrifugal pumps have standard grease lubrication, suitable for coupling with electric motors.

Multi-stage Side Channel Pump - CF

  • Multi-stage Side Channel Pump - CF Kirloskar Multistage Side Channel Cf Pumps Are Capable Of Handling Aerated Liquids. Cf Pumps Have Been Developed Especially For Heavy Duty Applications In All Industrial Areas. The Pump Is Capable Of Handling Clean, Slightly Contaminated Or Aggressive Liquids Without Any Problem Under The Most Difficult Operating Conditions. The Multi-stage Side Channel Cf Pump Is Very Reliable And Easy To Maintain. Cf Pumps Are Of Great Importance In Areas Where High Security And Prompt Service Is Indispensable.

NON-CLOG SUBMERSIBLE PUMP

Non-clog Submersible Pump - i-NS

  • Kirloskar i-NS submersible pump is used for sewage and seepage application. i-NS submersible pumps are single stage pumps equipped with a non-clogging impeller, which allows smooth passage of solids, thus making them suitable for a wide range of applications. i-NS pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with a pump connector unit and the connector unit is connected to the pump support bracket along with a rubber diaphragm to make it a leak-proof joint.

Non-clog Submersible Pump - NS

  • Kirloskar NS submersible pump is used for sewage and seepage application. NS submersible pumps are single stage, single suction pumps. NS submersible pump impellers are of non-clog type which allow smooth passage of solids and cater to wide range of applications. NS pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with a rubber diaphragm to make it leak proof joint.

NUCLEAR PUMP

Canned Motor Pump - KCS-CAN

  • Canned motor pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft, thus eliminating the requirement of a mechanical seal or other sealing device. The entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.

SELF PRIMING PUMPS

Self-priming Pump - SP
    • Handling Chemicals, Effluents, Sewage and Ash-Water
    • De-Watering Foundation, Trenches and Pits
    • Flood Water Handling
    • Pumping Water from Docks, Ports, Vessels
    • Dewatering from Basements, Multi-storeys, Shopping Malls, Godowns, etc.
    • Cooling Water for Marine Engines and Shovels

SPLIT-CASE PUMPS

Split Case Pump - DSM DSMT

Kirloskar DSM/DSMT split case pumps are horizontally mounted and axially split casing type, two stage pumps. Split case construction enables to remove the rotating unit of the pump without disturbing pipe connections and alignment.

Split Case Pump - SCT / Extended

SCT extended pumps are horizontally axially split casing, single stage pumps. SCT extended pumps are either double suction or single suction pumps with horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

Split_Case_Pump_/_i-HT

Kirloskar i-HT axially split case centrifugal pumps are available in both single stage and double stage construction, backed with a maintenance-friendly design and optimum efficiencies. All single stage pumps are provided with a double suction type impeller. The i-HT split case pump comes with externally removable type bearing housing, DIN cavity mechanical seal, impeller nut & sleeve arrangement and easy wear ring fitment. The i-HT horizontally split case pumps are maintenance friendly.

Split_Case_Pump_-_SCT

The XSC / XVSC split case centrifugal pump is available in a horizontal and vertical design and is capable of achieving high flow rates up to 6000m³/hr at low to medium pressures. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous solids. Common fluids pumped include fresh water, sea water and fuels (diesel, petrol and kerosene) and common applications include fuel transfer, chemical, energy plants, mining, fire fighting, irrigation, water supply, water treatment, pressurisation, dewatering, marine and cooling/heating conditioning (HVAC).

Split Case Pump - UP/UPL/UPH/UP(T)

Kirloskar UP series are horizontal split casing type pumps with suction, discharge nozzles and their supporting feet integrally cast in the lower half casing. This construction enables to remove the rotating unit for inspection and repairs by just removing upper half casing and without disturbing alignment, pipe connection or prime mover.

AIR VALVE

AIR VALVE

Kirloskar air valves are largely used across various municipal corporations, power plants as well as by irrigation and water supply authorities and several other industries. These valves are designed as per AWWA C512 specifications.

KINETIC AIR VALVE

Kirloskar Kinetic Air valves are vigorously used across various municipal corporations as well as by irrigation authorities, water supply authorities, National Thermal Power Corporation and industrial users. These valves are designed, manufactured and tested as per IS: 14845 standards.

Tamperproof Kinetic Air Valve

Kirloskar Tamperproof Kinetic Air valve is used by water supply authorities, municipal corporations, irrigation authorities, National Thermal Power Corporations and industrial users. These valves are designed, manufactured and tested as per IS: 14845 standards.

AIR VALVE

Cast Steel Check Valve

Kirloskar Cast Steel Check valves are popular across water supply authorities, National Thermal Power Corporation, Nuclear Power Corporation, industrial users and refineries. These valves are designed and manufactured as per BS: 1868 standards and tested as per EN: 12266-1 standards.

Forged Steel Check Valve

Kirloskar Forged steel FS check valves, widely used by the National Thermal Power Corporation, Nuclear Power Corporation, industrial users and refineries, are designed and manufactured as per BSEN ISO: 15761/ BSEN: 12266-1/ BS 5352 and tested as per BSEN: 12266-1/API -598/BS-5146 standards.

Kirloskar FS check valves are designed for handling very high pressures. Its rigid and sturdy design along with its low pressure characteristicsmake it a very formidable model in the entire product line.

Reflux Valve Single Door

Kirloskar Reflux valve single-door, designed, manufactured and tested as per IS: 5312 – 2 standards, is widely used by water supply authorities, municipal corporations, irrigation authorities, power corporations and industrial users.

SUCTION DIFFUSER

Suction Diffuser Valve
  • HVAC Building and construction (Multi- storied buildings /shopping complexes /auditoriums / indoor stadium / airports /refrigeration system)
  • Industry (pharmaceuticals / bottling plants / chemical / food and beverages)

TRIPLE DUTY VALVE

Triple Duty Valve
  • Kirloskar Triple Duty valves, designed as per latest editions of IS/ BSEN/ AWWA specifications, are largely used across general industries and the building and construction industry.